Skip directly to searchSkip directly to the site navigationSkip directly to the page's main content

Query Results for American Community Survey - Speak Spanish at Home

Query Result Page Options

This option remembers your currently selected filtering criteria and display options and applies (

Restrictions/conditions:

  • This features only effects queryable datasets loaded after the apply criteria feature is enabled.
  • When a new queryable dataset is loaded, this features does NOT clean/clear any of that dataset's default selected values - it simply supplements the newly loaded dataset's selections with those values captured when the apply criteria feature was enabled.
  • When in the builder interface you can override and make additional changes (select or deselect).
  • Changes made in the builder interface are not automatically saved to the enabled apply criteria definition. However, once you have a result you can reapply the current critera by using this dialog and pressing the "Reapply" button. If you do not see this button then the apply criteria feature has not been enabled.
  • Selections are applied according to what selections are available within that given queryable dataset. For example if your apply criteria is set for years 1999-2015 and the dataset does not have 1999 then only years 2000-2015 will be selected.
  • This feature is available immediately and does not require any user login account. However, if you wish to save this definition you will need to have either a free self registered user account or a secure DOH account and be logged in to be able to save your definitions.
  • TURNING OFF: These selections will remain in effect for the length of your current session on this site. It is turned off by pressing the "Clear" button.
  • TECHNICAL NOTE: The selection's internal dimension names and values MUST match. In some instances a value's title shown to the user will look the same as the dataset's but it is stored internally with a different name or value so they do not match and thus will not be selected. As an end user there is nothing that can be done about this situation because this is something the dataset author must setup. If you see something like this please contact us and report this issue.
) to all subseqent dataset query requests. This feature can help you save time and be consistent by automatically applying your defined selections to other queryable datasets you open.

One Example:

Doing studies on different datasets like you want to look at different survey datasets for hispanic females for years 2015-2018. You want to always display a county choropleth map and a horizontal bar chart. You make those initial selections, submit your selections, enable this apply criteria feature. From then on, those selections are automatically applied (as much as possible) to all subsequent queryable datasets you open.

Name Field

Unique name of this query definition. The name value needs to be a unique value within YOUR list of saved query definitions. The name value is used as part of the HTTP request URL to reference this query definition.

It is recommend you name your definitions in a consistent manner to help referencing and sharing with others. Names can be up to 250 characters long and can not contain spaces or special characters. Valid values for a name include upper and/or lower case alphabetic characters (A-z), and/or numeric values (0-9), and/or a dash or underscore that can be used as a seperator ("-", and/or "_").

If you name this definition the same name as an existing definition you will overwrite the current definition with this new one.

Title Field

The title value is the title you will see on your query definition selection lists. It is recommended that you keep your titles and unique so that they are meaningful, consistent, and easily identifyable. Titles can be a maximum length of 250 characters long. Use the "Description" field to list any extra details or notes that you'd like to have associated with this definition.

Description Field

The "Description" entry is provided as a place that you can store any notes or special descriptions that will allow you to use that definition. This can include descriptions like intended studies, limitations, and notes that can be used to help you remember what this definition was intended to be used for. A synopsis of the selections can also prove to be helpful but are not needed as the definition detail provides all of the selections. This field shows up on the list pages as an information popup next to the definition's title text.

Keep Definition Private Checkbox

The "Keep Private" checkbox controls if you want your query definition to be listable by other users. If checked then a user can not see this definition when they make a list request of your definitions.

Last Modified Date

Date this saved query definition was last updated.
N/A - New Definition
* = Required Input

You are not logged in. To save a query you must be logged in. Enter your username / password to proceed.

Once successfully logged in you will be redirected back to this page where you will then need to press the Save Query Defintion button again.

User ID/Email Address

Your username is your email address if this is a self registered account (that you specified this value when registering for the account). Otherwise it is your user ID that was provided to you by the system's user administrator. If you are trying to access your self registered account and are having problems see the Account Access Page. This page will provide options to check the status, resend the verification email, or email you your password. If not a self registered account you will need to contact your system administrator.

Password Security Note

This login information is NOT encrypted and should be treated as insecure. It is recommended that you NOT use an existing password as this password as this password value could be compromised then used to gain access to your other sensitive accounts.
Unauthorized access is strictly prohibited and subject to full prosecution. In using this account you agree to the department's full terms and conditions.

See the Introduction to My Selections page for more information.

Query Criteria

Measure Description:Percentage of population age 5 years and older speaking Spanish at home
Year Filter: 2017-2021 5-Yr ACS
Data Grouped By:County of Residence

Data Notes

  • American Community Survey Queries

    The American Community Survey (ACS) is an ongoing survey conducted by the United States Bureau of the Census. It gathers data on demographic, economic and social characteristics at various geographic levels within the United States. Data from the ACS are aggregated into one, three and five year periods. The data presented in this query tool are aggregated at the five year level, which makes these estimates more stable for New Mexico's sparsely populated areas. For definition of terms, please see the [[a href="./contentfile/pdf/2021_ACSSubjectDefinitions.pdf" 2021 ACS Subject Definitions document]].

    To improve the accuracy of the population count estimates in the data table, where feasible, the mid-year population estimates produced by the University of New Mexico Geospatial and Population Studies (GPS) Program have been used. For instance, the ACS percentages from the 2016-2020 dataset were applied to 2018 New Mexico GPS population estimates to provide an estimate for the number of New Mexicans affected. To see which person or household count estimates were used for this query, please see the data sources section.

    For more information on the Decennial Census and the American Community Survey, Please Visit the United States Census Bureau website at: [https://www.census.gov/]

  • NM-IBIS Map Guidance

    For guidance on NM-IBIS map categories, please visit the [[a href="./resource/MapChoroClasses.html" IBIS map guidance page]].
  • U.S. Data

    Comparable data for the U.S. and other states may be found on the U.S. Census Bureau's data website [https://data.census.gov/].

Data Sources

  • New Mexico Population Estimates: University of New Mexico, Geospatial and Population Studies (GPS) Program.
    (http://gps.unm.edu/)
  • U.S. Census Bureau, American Community Survey 5-Year Estimates
    (http://data.census.gov)

Data Issue

All population estimates apply to July 1 of the selected year. These estimates are considered the most accurate estimates for the state of New Mexico and should match those found on the University of New Mexico Geospatial and Population Studies website. Estimates include decimal fractions. Census tract population estimates were summed to produce County and Small Area population estimates. Population estimate totals may vary due to rounding. Population estimates for previous years are occasionally revised as new information becomes available. When publishing trend data, always be sure that your rates for earlier years match current rates on NM-IBIS that have been calculated with the most up-to-date population estimates.
Not seeing what you want? Click the "Modify Query" button to go to the query builder page. That page allows you to change filtering criteria and how your data are grouped. You can select chart and map types there, too.
These data were queried on: Tue, 19 Mar 2024 00:11:36 MDT
The dataset was last updated on: Fri, 25 Aug 2023 09:49:31 MDT
Community Health Assessment Program, Epidemiology and Response Division, New Mexico Department of Health, 1190 S. Saint Francis Drive, P.O. Box 26110, Santa Fe, NM, 87502. Contact Rena Manning at rena.manning@doh.nm.gov